43
Vacuuming Programmes
Normal. Timer: Auto
Select program?
Quick. Timer: 10min
Select program?
Spot
Select program?
Normal vacuuming
When you start Trilobite it is ready
to start vacuuming using the Normal
programme and automatic time
calculation.
1. When Trilobite is switched off or placed
in the charger, press
to start.
2. Press
to start vacuuming.
If you would like to change the time setting
(this may be necessary when vacuuming
floor surfaces of 40 m
2
or more), please
follow next steps instead of step 2.
3. Press
twice until “Select timer?”
is shown, confirm by pressing
.
4. Set the desired time setting by pressing
and then confirm with
.
(When “On” is chosed, use
to set
desired time, confirm by pressing
.
This is the vacuuming time after wall
mapping.)
5. Press
to commence vacuuming.
NOTE! Never start vacuuming at distances
under 0.5 m from a magnetic strip.
Vacuuming can always be interrupted by
pressing
. After this, pressing
recommences vacuuming, while pressing
will call up the menu.
Quick vacuuming
The Quick programme is identical with
Normal vacuuming except that wall
mapping is not included.Vacuuming takes
shorter time with the duration preset to
10 minutes, however, the vacuum result
may be slightly inferior.
1. After you have switched on Trilobite,
press
until “Select program?” is shown.
Confirm by pressing
.
2. Use
until “Quick” is displayed and
confirm by pressing
.
3. If you don’t want to change the time
setting, press
twice and start
vacuuming by pressing
. If you would
like to change the time setting, please
follow the next steps instead of step 3.
4. Confirm the option “Select timer?”
by pressing
.
5. Set the desired time setting by pressing
and then confirm with
.
(When “On” is chosed, use
to set
desired time, confirm by pressing
.)
6. Press
to commence vacuuming.
NOTE! Never start vacuuming at distances
under 0.5 m from a magnetic strip.
Vacuuming can always be interrupted by
pressing
. After this, pressing
recommences vacuuming, while pressing
will call up the menu.
Spot vacuuming
Use Spot vacuuming to quickly vacuum
a limited area, e.g. if you have spilled
something.The area to be vacuumed is
approx. 1 m
2
with Trilobite placed in the
centre of the area.The area is vacuumed
twice.
1. After you have switched on Trilobite,
press
until “Select program?” is shown.
Confirm by pressing
.
2. Use
until “Spot” is displayed and
confirm by pressing
.
3. Put Trilobite in the centre of the area to
be vacuumed and start vacuuming by
pressing .
Do not under any circumstances
vacuum liquids or lit or glowing objects,
e.g. cigarette butts.
NOTE! Never start vacuuming at distances
under 0.5 m from a magnetic strip.
Vacuuming can always be interrupted by
pressing
. After this, pressing
recommences vacuuming, while pressing
will call up the menu.
