OPERATING INSTRUCTIONS
62.9692.01
Page 10
lamp (LZ) will light up.
Programming the chilling process:
•
Press button M briefly. The display AT flashes and a C
appears behind the temperature indication. During this
announcement the cooling temperature can be set.
CHILL temperature set: A three digit display (AT) indicates:
C for Chill,
32 - 95 the temperature between 32 and 95°F
00 - 120 the temperature between 100 and 120°F
Owing to the internal conversion in °C not every value is possi-
ble. The following settings are allowed:
•
Use chilling-temperature knob T on display AT to set the
desired chilling temperature.
The chilling time can also be entered as follows:
•
Press button DT and use chilling-time knob D on display
AD to set the desired chilling-time period.
Start chilling & cooking programming:
•
Switch on the mixer with switch RS (an intermittent signal
will sound if the mixer is not activated and error A03 will be
displayed).
•
Press button TT
While this process is taking place, each of the currently active
lamps LT and LD will flash for control purposes.
At the predetermined starting time, a signal will sound three
times for control purposes; the predetermined chill & cook
processes will now operate with lamps LT and LD flashing if
previously selected.
•
When the cooling temperature has been reached, a signal
will sound until confirmed by pressing button Q.
•
The cooling temperature attained is now maintained.
•
Now press button TT to end the cooking & chilling proc-
ess.
CHILL & COOK (automatic chilling and cooking)
Programming chilling and cooking durations and their
starting time
(if required)
•
The chill & cook program is switched on by pressing button
F. Lamps LF and LZ will light up.
Programming the chilling process:
•
Press button M briefly and use chilling-temperature knob T
on display AT to set the desired chilling temperature as
explained in COOK & CHILL; a C with the temperature dis-
play will flash on display AT.
•
The starting time can also be entered as follows:
Press button ZT and use starting-time knob Z on display
AZ to set the desired starting time; lamp LZ will light up.
Programming the cooking process:
•
Use cooking-temperature knob T on display AT to enter the
desired cooking temperature.
•
Use cooking-time knob D on display AD to set the desired
period of cooking; lamp LD will light up.
Start chilling & cooking programming:
•
Switch on the mixer with switch RS (an intermittent signal
will sound if the mixer is not activated and error A03 will be
displayed).
•
Press button TT
While this process is taking place, each of the currently
active lamps LZ, LT and LD will flash for control purposes if
previously selected.
At the predetermined starting time, a signal will sound
three times for control purposes; the predetermined chill &
cook processes will now operate with lamps LT and LD
flashing if previously selected.
•
When the cooking temperature has been reached, a signal
will sound until confirmed by pressing button Q.
•
The cooking temperature attained is now maintained.
•
Now press button TT to end the chilling & cooking process.
Display
Hold-Temperature
°F
°C
C32
32
0
C41
41
5
C50
50
10
C59
59
15
C68
68
20
C77
77
25
C86
86
30
C95
95
35
C04
104
40
C13
113
45
C20
120
49
TT Button, activation of settings
LT Lamp, cooking temperature
DT Button, cooking time
LD Lamp, cooking time expires
ZT Button, starting time
LZ Lamp, starting time
LH
LM Lamp, program activation
M Button, chilling
H
Q
AT Display, chilling tempera-
ture
T
Button, chilling temperature
AD Display, remaining cooking
time
D
Cooking time knob
AZ Display, time
Z
Starting time knob
LF
F
Fig. 7
Right console
