Electrolux TG 10010, User Manual

Page: 15 / 23

32 electrolux
GB
FR
Change of door opening direction
Should the setting-up place or
handling demand it, door-opening
direction can be refitted from right-
handed to left-handed.
Following operations are to be done
on the basis of figures and
explanations:
Break the circuit of the appliance.
Tilt back the appliance carefully
being careful so that the
compressor can not touch the floor.
It is recommended to ask another
person for help, who can keep the
appliance at this position safely.
Unscrew the adjustable feet
situated on both sides (2 pieces), in
addition the screws fixing the lower
door holders (3 pieces) and the
screw on the other side
respectively.
Put over the pin in the lower door
holding plate in the direction of the
arrow.
Take the door off.
Unscrew the top door holding pin
and put it on the other side.
Fit the door to the top door holding
pin.
Fix the bottom door holders on the
other side being careful that the
edge of the door is parallel with the
side of cupboard.
Then screw in the one screw in the
place set free on the other side as
well as the adjustable feet (2
pieces) and set up the box.
Put over the handle and the plastic
nails on the other side.
Put the appliance to its place, set it
level and apply voltage to it.
In case you do not want to perform the
procedures above, call the nearest
brand-mark service. Technicians will
accomplish the refitting expertly for
charge.