Electrolux Saladette 950, Installation And Operating Manual

Page: 20 / 26

20
Models with steel top 3.
H CONTROL PANEL
H.1 Description of control panel
1
Auxiliary users on signalling icon
2
Defrost cycle activated signalling icon
3
Compartment fans on signalling icon
4
Compressor on signalling icon
5
Temperature alarm signalling icon
6
“Prg/mute“ button for silencing the alarm buzzer.
7
Multifunction ON/OFF and UP button for switch-
ing the appliance on and off and for increasing
the values.
8
DOWN and DEFROST button for activating
manual defrost and decreasing the values.
9
SET button for accessing the Set point.
10
Service alarm signalling icon
I OPERATION
I.1 Switching on and temperature
adjustment
When switched on, the instrument performs a Lamp Test, i.e.
for a few seconds the display and icons flash, verifying its
correct functioning.
• If the instrument displays the compartment temperature
when switched on, the appliance is already on;
• If OFF is displayed, press the ON/OFF button for a few
seconds to activate the appliance; the display shows the
message ON and then the compartment temperature.
• To switch the appliance off, press the ON/OFF button for a
few seconds; the message OFF appears on the display.
To SET the compartment temperature, proceed as
follows:
• Press the button for a few seconds and the SET POINT
value appears on the display.
• To change the SET value, press the increase value button
UP or the decrease value button DOWN .
• If no button is pressed for 60 seconds (TIME OUT), or by
pressing the SET button once, the digital thermostat
memorises the last set value and the normal display is
restored.
The temperature range is set from a minimum to a
maximum, according to the following values:
Max. position = + 10
Min. position = 0
I.2 Signalling icons
The digital thermostat has the following signalling ICONS:
lit up This icon indicates compressor
activation.
lit up This icon indicates the manual defrost
function in progress.
lit up This icon indicates activation of com-
partment fans (if present).
lit up This icon indicates activation of auxiliary
users (if present).
lit up This icon indicates that a service alarm
has occurred during appliance
operation.
lit up Indicates that a temperature alarm has
occurred during appliance operation.
3 mm Ø
1
2
3
4
5 6 7
8 9 10