Dishwasher
04.99
HV 83-N
H:\H1\GSP\TECHNIK\AEGHB\137201GB.P65
Easytronic Dishwashers with Flow Heater - Fully Integrated, Integrated, Built Under, Freestanding
292 1372 7
292 1372 07
Water Softening
The components required for water softening.
1.
softener unit
2.
regeneration dosage chamber
The incoming water flows through the softener which works
according to the ion exchange principle. The ion exchanger is
filled with small epoxy resin balls. The resins exchange the
hardness constituents (calcium and magnesium), for sodium
ions.
When all the sodium ions are used up, it is necessary to
regenerate the softener. This is done by flushing a brine
solution through the softener.
Afterwards the softener is washed out with fresh water and is now fully effective.
Depending on the water hardness, regeneration is only necessary after several wash cycles.
The softening system is designed for a water hardness of up to 50 °dH.
Position of Components
Detergent dispenser (1)
Drying fan intake vent (2)
Spray arms (3)
input module (1)
output module (2)
2
1
Technical Data
1
2
3
3
1
2
