Dishwasher
04.99
HV 83-N
H:\H1\GSP\TECHNIK\AEGHB\137201GB.P65
Easytronic Dishwashers with Flow Heater - Fully Integrated, Integrated, Built Under, Freestanding
292 1372 9
292 1372 09
Removing the regeneration dosage chamber :
1
disengage locking tabs (1)
2
disconnect hoses (2)
3
holding the top of the chamber, pull upwards
disengaging it from the softener.
Removing the softener unit :
1
remove the securing nut located under the salt cap.
2
press softener (1) down and remove it through the
front from the base area
3
CAUTION if accessible release reed switch.
Removing the base :
1
remove side panels, rear panel and plinth panel
2
gently release base fixing clips with a screwdriver
(figure)
3
take off base carefully and release circulation pump,
electronic and heater relay
4
disconnect the float switch
With base removed the circulation pump (1) is accessible.
1
Technical Data
2
1
1
