NOFROST UNDERCOUNTER FREEZERS WITH ELECTRONIC TIMER
19/20
Defrosting heater
The defrosting heater
G
is inserted into the
aluminium wings of the battery; to replace it, it is
necessary to open the hooks
N
at the bottom of the
conveyor with a screwdriver and extract the heater
from the battery wings paying attention not to
deform them.
Thermal overload cut-outs
The two +10°C e +40°C overload cut-outs are
connected together in a single component
E
and
are not available as single spare part.
They are fixed to the conveyor with two screws.
The conveyor
The conveyor for the defrosting heater is fitted to
the bottom of the compartment with two clips; to
remove the conveyor it is necessary to push down
the two clips.
The fan
The fan is fitted with two screws.