Electrolux N520J, Use & Care Manual

Page: 15 / 20

Freezer Baskets (where fitted)
Freezer baskets and a freezer shelf are fitted to bottom freezer
refrigerators. Wire baskets are used to provide easy visibility
of the contents. Both the baskets and the shelf pull out for
easy access and have a stop to prevent the basket and shelf
being pulled out to far.
To remove the basket
or shelf, pull it out until
it hits the stop then lift
the front to unhook the
stop while continuing
to pull forward
.
Changing the Light Bulb
Food Compartment
Step 1. Switch off the power at the power point and remove
the refrigerator’s power cord from the power point.
Step 2. Remove shelves.
Step 3. Carefully unclip the light cover. You do this by pulling
the upper part of the cover towards the front of the cabinet.
(See Diagram below).
Step 4. Unscrew the light bulb
and replace it with a bulb that
is the same as the original.
Step 5. Replace the light cover
by hooking the light cover lugs
into the bottom of the housing
and pressing the upper part of
the cover until it clips in.
Step 6. Replace shelves.
Step 7. Wait 5 minutes to ensure
pressures in the refrigeration
system are equalized. Then
turn the refrigerator on at the
power point.
Freezer Compartment (where fitted)
Step 1. Switch off the power at the power point and remove the
refrigerator’s power cord from the power point.
Step 2. Carefully unclip the light cover. You do this by
pulling the light cover tab at the rear towards the front of the
cabinet. (See Diagram below)
Step 3. Unscrew the light bulb and replace it with a bulb that
is the same as the original.
Step 4. Replace the light cover by hooking the light cover lugs
into the front of the housing and pressing the rear of the cover
up until it clips in.
Step 5. Wait 5 minutes to ensure pressures in the refrigeration
system are equalized. Then turn the refrigerator on at the
power point.
4 - Operating your refrigerator
5 - Care & Maintenance
Page 15