Spill safe glass shelves (where fitted)
Spill safe glass shelves keep spills on the shelf. A shelf
retaining system minimizes accidental movement of shelves.
The shelves can be adjusted to many different heights. Spill
safe glass shelves are not to be used as slide out shelves.
Split Glass Shelf (where fitted)
This shelf can be used either as a full depth shelf or when tall
items need to be stored at the front of the refrigerator it can
be collapsed to half its original depth.
To collapse the shelf:
• Pull the front half of the shelf
forward (1), then, from the
underside, lift the front half of
the shelf by raising the rear edge
over the recessed hook detail (2).
• Pull the shelf forward and allow the rear to drop into
the side channels.
• Push the front shelf backwards (3,4) until it reaches the
rear stops.
Repositioning:
The shelf can be repositioned within the refrigerator unit by
pulling the whole assembly out until the side panels are free
to pivot down, then pivoting the rear of the shelf until the
shelf is free from the liner runners. The shelf can then be
positioned in any of the runners – this is a very useful feature
if your appliance door happens to have limited access.
Deodoriser
Your refrigerator is fitted with a catalysing deodoriser to assist
with the removal of food odours inside your refrigerator.
It is located at the air
return so odours are
removed by adsorbtion
through the filter by the
normal operation of the
refrigerator (see diagram
1). Keeping food covered
and wrapping food with
plastic wrap will also help
to reduce the odours
inside your refrigerator.
Bottle Snugger operation (where fitted)
The bottle snugger is used to prevent bottles from falling
over. The snugger consists of two parts, a sliding front,
and a rotating retainer ring. The retainer ring can be rotated
through 360° but has positive locations for horizontal and
vertical positions.
The snugger can be used in two positions:
Horizontal
When the snugger ring is
horizontal (A), any item that fits
within the ring can simply be
placed inside it.
Vertical
When the snugger ring is
vertical (B), it is possible to
simply slide the snugger along
the bottle retainer bar until it
is pushed up against a bottle.
Note: the bottle should be
constrained on the other side
by either the end of the bin or
other adjacent bottles.
4 - Operating your refrigerator
Page 14
Diagram 1
A
B
Summary of Contents for N520J
Page 1: ...REFRIGERATION REFRIGERATION ...
Page 19: ......
