Electrolux LTA13, Instruction Manual

Page: 13 / 48

13
8.3 Dispenser
To clean the dispenser, proceed as follows:
1. Open the drawer completely.
2. Remove the dispenser from
the inside of the drawer and wash it.
3. If necessary, the inside can
be cleaned with the help of a small
brush.
The pieces of the drawer can be
cleaned using water, soap, a cloth
or a brush to remove small wastes.
8.4 Reservoir
1. Open the drawer completely.
8.1 Inside
Clean the inside of the washing
machine at least once a month.
Put 1 liter of bleach in the drum.
Select the High water level and the
White program. Let the washing
machine complete the cycle to
ensure the complete removal of
bleach.
This cleaning should be done to
prevent spots in clothes, caused by accumulated
waste in the washing machine due to excessive use
of soap and softener.
8.2 Lint Filter
The lint filter retains l int which is eliminated from
the clothes during washing, when using the
medium and high water levels. To preser
ve the
efficiency of this filter is recommended to clean it
after each washing cycle.
T
o clean the filter, turn and pull
the lid of the agitator upwards fig 1.
Press the sides locks fig 2 to
remove the filter. Remove the lint
and then wash the filter in running
water (fig. 3). Place the filter on
its housing, ensuring that it
is properlypositioned.
Place the filter in the
agitator and fit it until the
end. The accumulation of
lint in the filter can cause
the clogging in the mesh.
To clean the filter, use
only running water.
fig.1
fig.2
Do not use cleaners or brushes
which can damage the filter
mesh. During the washing of
colored clothes, can occur
leberation ofdyes, dyeing the
filter mesh.
fig.3
2. Remove the reservoir.
3. Remove the reservoir lid releasing both side clicks
and wash both components.
3
2
1
8. Cleaning and Maintenance