3. To activate the delay timer, press the START PAUSE button. The amount of time re
-
maining until the programme is set to start is continuously displayed (e.g. 15h, 14h,
13h, … 30' etc).
The delay time icon is on.
CHILD LOCK function
The child lock can be set to prevent a programme being accidentally started or a programme
in operation being accidentally changed. The child lock function locks all buttons and the
programme knob. The child lock can be activated or deactivated by holding down the
BUZZER and TIME buttons simultaneously for 5 seconds.
– Before programme is started: Appliance cannot be used
– After programme is started: Programme in operation cannot be changed
The icon appears in the display to indicate that the child safety device is activated.
The child safety device is not deactivated once the programme comes to an end.
If you want to set a new programme, you must first deactivate the child safety device.
Starting the programme
Press the START PAUSE button. Led above stops
flashing, becomes steady. The programme is star
-
ted. Display shows elapsing cycle time or delay
time if activated.
Changing programme
To change a programme which has been selected by mistake once the programme has
started, first turn the programme selector to OFF and then reset the programme.
The programme can no longer be changed directly once the programme has started. If
nevertheless there is an attempt to change the programme on the programme knob, the
programme progress display and the maintenance indicators flash. If an option button
(excluding the BUZZER button) is pressed,
Err
appears in the multidisplay. The drying pro
-
gramme is not however affected by this (laundry protection).
Putting in extra items or taking items out before end of programme
1. Open loading door.
WARNING!
Laundry and drum can become hot.
Risk of burns!
2. Load or remove laundry items.
3. Close loading securely. Lock must audibly lock.
4. Press the START PAUSE button to continue the drying cycle.
Daily use
13
