background image

Selecting the programme

Use the programme selector to set the programme

you require. The estimated time to end of the pro

-

gramme appears in the LCD in h:mm format

(hours:minutes).

During the cycle time elapses by steps of one mi

-

nute; less than 1 hour the leading zeros are not

shown (ex. “59”, “5”, “0”).

DELICATE function

For especially gentle drying of sensitive fabrics with the   care label and for temperature-

sensitive textiles (e.g. acrylic, viscose). Programme is executed with reduced heat.

Delicate function is only suitable for use with loads of up to 3kg.

To activate it:

1. Choose the drying programme.

2. Press DELICATE button - the led above is on.

To deselect function press again DELICATE button.

Led above is off.

LONG ANTI-CREASE function

A long anti-crease phase lengthen the anti-crease phase (30 min.) at the end of the drying

additionally by 60 minutes. The drum rotates at intervals during this phase. This keeps the

laundry loose and free of creases. Phase lasts in total 90 minutes. The laundry can be

removed at any time during the anti-crease phase.

To activate it:

1. Choose the drying programme.

2. Press LONG ANTI-CREASE button - the led

above is on.

To deselect function press again LONG ANTI-

CREASE button. Led above is off.

BUZZER function

The appliance is supplied with the BUZZER function deactivated.

The buzzer sounds or plays a tune when activated during:

– cycle end

Daily use

11

Summary of Contents for LAVATHERM 56840L





























Reviews: