background image

cookware must cover the centres of both

zones but not go beyond the area marking. If

the cookware is located between the two

centres, Bridge function will not be activated.

5.5 Bridge

The function operates when the

pot covers the centres of the two

zones.

This function connects two cooking zones

and they operate as one.
First set the heat setting for one of the

cooking zones.
To activate the function for left / right
cooking zones:
 touch   /  . To set or

change the heat setting touch one of the left /

right control sensors.

To deactivate the function: touch   /  .

The cooking zones operate independently.

5.6 Automatic Heat Up

Activate this function to get a desired heat

setting in a shorter time. When it is on, the

zone operates on the highest setting in the

beginning and then continues to cook at the

desired heating setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking
zone:
 touch   (  comes on). Immediately

touch a desired heat setting. After 3 seconds

 comes on.

To deactivate the function: change the

heat setting.

5.7 PowerBoost

This function makes more power available to

the induction cooking zones. The function

can be activated for the induction cooking

zone only for a limited period of time. After

this time the induction cooking zone

automatically sets back to the highest heat

setting.

Refer to “Technical data”

chapter.

To activate the function for a cooking
zone:
 touch  .   comes on.
To deactivate the function: change the

heat setting.

5.8 Timer

• Count Down Timer

You can use this function to set the length of

a single cooking session.
First set the heat setting for the cooking

zone, then set the function.

To set the cooking zone: touch 

repeatedly until the indicator of a cooking

zone appears.

To activate the function: touch   of the

timer to set the time (00 - 99 minutes). When

the indicator of the cooking zone starts to

flash, the time counts down.

To see the remaining time: touch   to set

the cooking zone. The indicator of the

cooking zone starts to flash. The display

shows the remaining time.

To change the time: touch   to set the
cooking zone. Touch   or  .

To deactivate the function: touch   to set
the cooking zone and then touch  . The

ENGLISH

11

Summary of Contents for KIV644





















Reviews: