Electrolux Kitchenette oven Profi-Steam EB SL7, User Manual

Page: 26 / 36

26 electrolux
2. Insert the screw and tighten (2).
Steam generation system
1
Important: Wipe the steam generator
dry after each use. Soak up water with
a sponge.
3
Remove any lime residue with water and
vinegar.
1
Important: Chemical descaling agents
can damage the oven's surface enamel.
Always follow the manufacturer's in-
structions exactly.
Water Drawer and Steam Generator
1. Pour water and vinegar (about 250 ml)
into the steam generator
via the water
drawer .
Leave to work for approx. 10 minutes.
2. Remove the water and vinegar with a
non-abrasive sponge.
3. Rinse out the steam generation system
through the water drawer using clean
water (100-200 ml).
4. Soak up remaining water from the
steam generator with the sponge and
wipe dry.
5. Leave the oven door open to let the
oven dry out completely.
Oven Light
1
Danger of electrocution! Before re-
placing the oven light bulb:
• Switch off the oven.
• Take the fuses out of the fuse box, or
switch off.
3
To protect the oven light bulb and the
glass cap, lay a cloth on the bottom of
the oven.
Replacing the rear oven light bulb/
cleaning the glass cap
1. Take off the cap by turning to the left.
2. Remove seals and metal ring, and clean
the glass cap.
3. If necessary:
replace bulb with a 25 Watt, 230V,
300°C heat-resistant
oven light bulb.
4. Fit seals and metal ring to the glass cap.
5. Re-fit the glass cap.