Electrolux KGG64375K, User Manual

Page: 21 / 52

Problem Possible cause Remedy
The control panel bright‐
ness is reduced or it
switches off.
The temperature of the
plate is high. To ensure
long lifetime of the display
the brightness is reduced
depending on the tempera‐
ture of the hob. Above a
certain temperature the
control panel switches off.
Let the hob cool down.
The control knob pilot
lights turn on after con‐
necting the hob to the
mains or after a power out‐
age.
Pilot light test. Refer to "Installation".
Hob²Hood function does
not work.
You covered the control
panel.
Remove the object from
the control panel.
You cannot activate or op‐
erate Hob²Hood and Mi‐
nute Minder.
There is water or fat stains
on the control panel.
Clean the control panel.
The display shows "E t" - Turn off the control knobs
and wait until the display is
off or disconnect the appli‐
ance to the main to return
to the initial condition.
does not shows up
when knobs are opened.
Selected Automatic Mode
is A0.
Refer to "Daily use".
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre
and conditions of guarantee are in the
guarantee booklet.
ENGLISH 21