36 electrolux
INSTALLATION
Location
Take utmost care when handling
your appliance so as not to
cause any damages to the cooling unit
with consequent possible fluid
leakages.
• During normal operation, the
condenser and compressor at the
back of the appliance heat up
considerably. Always ensure that
there is adequate ventilation as a
failure to do this will result in
component failure and possible
food loss. See installation
instructions.
• Important: if the supply cord is
damaged, it must be replaced by a
special cord or assembly availa-ble
from the manufacturer or its service
agent.
Positioning
• Unpack the cabinet and check that
it is in good condition and free of
any transport damage.
• Place the refrigerator away from
direct sunlight and heat sources.
• Avoid prolonged exposure of the
appliance to direct sunlight.
• For safety reasons, minimum
ventilation must be as shown in Fig.
Attention: k
keep vventilation o
openings
clear o
of o
obstruction.
• It is necessary that the niche is
provided with a conduct of
ventilation having the following
dimensions:
Depth
50 mm
Width
540 mm
The climate classification can be found
on the rating plate, which is located
inside the cabinet on the left hand wall.
The following table shows which
ambient temperature is correct for
each climate classification:
50 mm
min.
200 cm
2
200 cm
2
min.
D526
C l i m a t e
classification
SN
+10 to +32°C
+16 to +32°C
+18 to +38°C
+18 to +43°C
N
ST
T
for a
an a
ambient ttemperature o
of
