Electrolux Iron Aid EDI97170W, User Manual

Page: 23 / 60

Weight when empty approx. 46 kg
Loading volume (depends on programme)
1)
max. 7 kg
Voltage 230V
Required fuse 16A
Total power 2350
Energy efficiency class B
Energy consumption (7 kg of cotton, predrained
at 1000 rpm)
2)
3,9
Use Domestic
Permissible ambient temperature + 5°C to + 35°C
Consumption values
The consumption values have been established under standard conditions. They may deviate when
the machine is operated in domestic circumstances.
Programme Energy consumption in kWh
COTTON CUPBOARD DRY
2)
4,0 (7 kg load pre-drained at 800 rpm)
3,9 (7 kg load pre-drained at 1000 rpm)
3,6 (7 kg load pre-drained at 1400 rpm)
COTTON IRON DRY
2)
3.3 (7 kg load pre-drained at 1000 rpm)
SYNTHETICS CUPBOARD DRY
2)
1,3 (7 kg load pre-drained at 1200 rpm)
1) Different loading volume data may be needed in some countries as a result of different measuring
methods.
2) in accordance with EN 61121
Machine settings
Setting Implementation
BUZZER permanent off 1. Turn the programme selector to any programme.
2. Press simultaneously the
DRYNESS and DELICATE buttons
and hold down for approx. 5 seconds.
3. The buzzer is by default always off. You can use BUZZER button
to activate or deactivate sound but machine does not memorize
your selection.
Water hardness
Water contains, a variable
quantity of limestone and min-
eral salts of which quantities
vary according to geographical
locations thus varying its con-
ductivity values.
Relevant variations of the con-
ductivity of the water compared
to those prefixed by the factory
could slightly influence the re-
sidual humidity of the laundry at
the end of the cycle. Your dryer
allows you to regulate the sen-
sitivity of the drying sensor
based on conductivity values of
the water.
1. Turn the programme selector to any programme.
2. Press simultaneously the
DELICATE and START/PAUSE but-
tons and hold down for approx. 5 seconds. The current setting
is on the display:
–
low conductivity <300 micro S/cm
–
medium conductivity 300-600 micro S/cm
–
high conductivity >600 micro S/cm
3. Press the START/PAUSE button sequentially until you set de-
sired level.
4. To memorize setting press simultaneously the the DELICATE
and START/PAUSE buttons or turn knob to O OFF position
electrolux 23