Electrolux Iron Aid EDI97170W, User Manual

Page: 19 / 60

In order to continue the programme, the con-
densed water container must first be emp-
tied.
Warning! The condensate is not
suitable for drinking or for preparing
foodstuffs.
1. Pull drawer containing condensed water
container all the way out (1) and pull up
the condensed water container’s drain-
age pipe as far as it will go (2).
1.
2.
2. Pour out the condensate into a basin or
similar container.
3. Push drainage pipe in and refit con-
densed water container.
If the programme has been interrupted as
a result of the condensate tank being full:
Press the START/PAUSE button to con-
tinue the drying cycle.
The condensate tank has a volume of
approx. 4 litres. This is sufficient for
around 7 kg of laundry which has previ-
ously been spun at 1000 revolutions/
minute.
4. The condensed water be used as distilled
water, e.g. for steam irons. However, first
filter the condensed water to remove any
residues and small pieces of fluff.
Using the attached canister to filter: Pour
the water out of the container straight
through the filter at the top of the canis-
ter.
Cleaning heat exchanger
If the HEAT EXCHANGER is displayed,
the heat exchanger needs to be cleaned.
Caution! Operating when the heat
exchanger is blocked with fluff can
damage the dryer. This also increases
energy consumption.
1. Open door.
2. Open door in plinth. To do this, press the
release button on the bottom of the door
aperture and open the door in the plinth
to the left.
3. Clean fluff from the inside of the door and
the heat exchanger front chamber. Wipe
the door seal with a damp cloth.
4. Turn both lock washers inwards.
electrolux 19