![Electrolux IK3030Z User Manual Download Page 10](http://html.mh-extra.com/html/electrolux/ik3030z/ik3030z_user-manual_2385284010.webp)
If the cabinet will be kept on, ask somebody
to check it once in a while to prevent the food
inside from spoiling in case of a power failure.
WHAT TO DO IF…
Warning!
Before troubleshooting,
disconnect the mains plug from the
mains socket.
Only a qualified electrician or competent
person must do the troubleshooting that
is not in this manual.
Important!
There are some sounds during
normal use (compressor, refrigerant
circulation).
Problem
Possible cause
Solution
The appliance is noisy
The appliance is not supported
properly
Check if the appliance stands sta-
ble (all the four feet should be on
the floor)
The appliance does not
operate. The lamp does
not operate.
The appliance is switched off.
Switch on the appliance.
The mains plug is not connected
to the mains socket correctly.
Connect the mains plug to the
mains socket correctly.
The appliance has no power.
There is no voltage in the mains
socket.
Connect a different electrical appli-
ance to the mains socket.
Contact a qualified electrician.
The lamp does not work.
The lamp is in stand-by.
Close and open the door.
The lamp is defective.
Refer to "Replacing the lamp".
The Pilot light flashes.
The appliance is not working
properly.
Contact a qualified electrician.
The compressor operates
continually.
The temperature is not set cor-
rectly.
Set a higher temperature.
The door is not closed correctly.
Refer to "Closing the door".
The door has been opened too
frequently.
Do not keep the door open longer
than necessary.
The product temperature is too
high.
Let the product temperature de-
crease to room temperature before
storage.
The room temperature is too
high.
Decrease the room temperature.
The compressor does not
start immediately after
pressing the Action Cool
button, or after changing
the temperature.
The compressor starts after a pe-
riod of time.
This is correct.
Water flows on the rear
plate of the refrigerator.
During the automatic defrosting
process, frost defrosts on the rear
plate.
This is correct.
Temperature cannot be
set .
Schnellkühlen function switched
on.
Switch off Schnellkühlen Action
Coolmanually, or wait to set the
temperature until the function has
reset automatically. Refer to " Ac-
tion Cool function".
10
electrolux