Electrolux IK1345SL, User Manual, Page: 70 / 76

Problem Possible cause Solution
Water flows on the rear
plate of the refrigerator.
During the automatic de-
frosting process, frost melts
on the rear plate.
This is correct.
Water flows into the refrig-
erator.
The water outlet is clogged. Clean the water outlet.
Food products prevent that
water flows into the water
collector.
Make sure that food prod-
ucts do not touch the rear
plate.
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the com-
pressor.
Attach the melting water
outlet to the evaporative
tray.
Temperature cannot be set. The Action Freeze or Shop-
ping function is switched
on.
Switch off Action Freeze or
Shopping manually, or wait
until the function resets au-
tomatically to set the tem-
perature. Refer to "Action
Freeze or Shopping func-
tion".
DEMO appears on the dis-
play.
The appliance is in demon-
stration mode.
Keep the Mode button
pressed for approximately
10 seconds until a long
sound is heard and display
shuts off for a short time.
The temperature in the ap-
pliance is too low/too high.
The temperature regulator
is not set correctly.
Set a higher/lower tempera-
ture.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The food products' temper-
ature is too high.
Let the food products tem-
perature decrease to room
temperature before storage.
Many food products are
stored at the same time.
Store less food products at
the same time.
The thickness of the frost is
greater than 4-5 mm.
Defrost the appliance.
The door has been opened
often.
Open the door only if nec-
essary.
The Action Freeze function
is switched on.
Refer to "Action Freeze
function".
The Shopping function is
switched on.
Refer to "Shopping func-
tion".
www.electrolux.com 70