Electrolux IK1345SL, User Manual, Page: 69 / 76

Problem Possible cause Solution
A rectangular symbol is
shown instead of numbers
on the Temperature Dis-
play.
Temperature sensor prob-
lem.
Contact the nearest Author-
ized Service Centre (the
cooling system will continue
to keep food products cold,
but temperature adjustment
will not be possible).
The lamp does not work. The lamp is in stand-by. Close and open the door.
The lamp is defective. Contact the nearest Author-
ized Service Centre.
The compressor operates
continually.
Temperature is set incor-
rectly.
Refer to "Operation" chap-
ter.
Many food products to be
frozen were put in at the
same time.
Wait some hours and then
check the temperature
again.
The room temperature is
too high.
Refer to climate class chart
on the rating plate.
Food products placed in
the appliance were too
warm.
Allow food products to cool
to room temperature before
storing.
The Action Freeze function
is switched on.
Refer to "Action Freeze
function".
The Shopping function is
switched on.
Refer to "Shopping func-
tion".
There is too much frost and
ice.
The door is not closed cor-
rectly or the gasket is de-
formed/dirty.
Refer to "Closing the door".
The water drainage plug is
not correctly positioned.
Position the water drainage
plug in the correct way.
Food products are not
wrapped properly.
Wrap the food products
better.
Temperature is set incor-
rectly.
Refer to "Operation" chap-
ter.
The compressor does not
start immediately after
pressing the Action Freeze,
or after changing the tem-
perature.
This is normal, no error has
occurred.
The compressor starts after
a period of time.
The compressor does not
start immediately after
pressing the Shopping, or
after changing the tempera-
ture.
This is normal, no error has
occurred.
The compressor starts after
a period of time.
ENGLISH 69