Electrolux IG1235SN, User Manual

Page: 60 / 68

Problem Possible cause Solution
The temperature in the ap-
pliance is too high.
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm".
The door is left open. Close the door.
The temperature in the ap-
pliance is too high.
Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
A rectangular symbol is
shown instead of numbers
on the Temperature Dis-
play.
Temperature sensor prob-
lem.
Contact the nearest Author-
ized Service Centre (the
cooling system will continue
to keep food products cold,
but temperature adjustment
will not be possible).
The compressor operates
continually.
Temperature is set incor-
rectly.
Refer to "Operation" chap-
ter.
Many food products to be
frozen were put in at the
same time.
Wait some hours and then
check the temperature
again.
The room temperature is
too high.
Refer to climate class chart
on the rating plate.
Food products placed in
the appliance were too
warm.
Allow food products to cool
to room temperature before
storing.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The FastFreeze function is
switched on.
Refer to "FastFreeze func-
tion".
There is too much frost and
ice.
The door is not closed cor-
rectly or the gasket is de-
formed/dirty.
Refer to "Closing the door".
Food products are not
wrapped properly.
Wrap the food products
better.
The compressor does not
start immediately after
pressing the FastFreeze, or
after changing the tempera-
ture.
This is normal, no error has
occurred.
The compressor starts after
a period of time.
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the com-
pressor.
Attach the melting water
outlet to the evaporative
tray.
www.electrolux.com 60