29
Defrost Power
defrost power
Evaporation
Heater El.
heating element power
Lighting
inside light power
Class
climatic class
Refrigerant
type of refrigerant gas
Cap.
nominal capacity
IP21
dust and water protection
rating
CE
CE marking
Electrolux
Professional SPA
Viale Treviso 15
33170 Pordenone
Italy
Manufacturer
* Description of certification group
FO
horizontal refrigerator
CL
Range :CL= Concept Line ; SB= Standard Benefit
BT
Temperature range (TN=refrigerated; BT=freezer)
When installing the appliance, make sure the electrical connection
is carried out in compliance with that specified on the dataplate.
ATTENTION!
Do not remove, tamper with or make the machine
“CE” marking illegible.
ATTENTION!
Refer to the data given on the machine “CE”
marking for relations with the Manufacturer (e.g.
when ordering spare parts, etc.).
ATTENTION!
When scrapping the machine, the “CE” marking
must be destroyed.
A.1.7 APPLIANCE IDENTIFICATION
This manual applies to various refrigerator/freezer models.
For further details regarding your model, refer to par. A.2.2
DIMENSIONS, PERFORMANCE AND CONSUMPTION.
A.1.8 COPYRIGHT
This manual is intended solely for consultation by the operator
and can only be given to third parties with the permission of
Electrolux Professional SPA.
A.1.9 RESPONSIBILITY
The Manufacturer declines any liability for damage and
malfunctioning caused by:
• non-compliance with the instructions contained in this manual;
• repairs not carried out in a workmanlike fashion, and
replacements with parts different from those specified in
the spare parts catalogue (the fitting and use of non-original
spare parts and accessories can negatively affect machine
operation and invalidates the warranty);
• operations by non-specialised technicians;
• unauthorised modifications or operations;
• inadequate maintenance;
• improper machine use;
• unforeseeable extraordinary events;
• use of the machine by uninformed and untrained personnel;
• non-application of the current provisions in the country of use,
concerning safety, hygiene and health in the workplace.
The Manufacturer declines any liability for damage caused by
arbitrary modifications and conversions carried out by the user
or the Customer.
The employer, workplace manager or service technician are
responsible for identifying and choosing adequate and suitable
personal protection equipment to be worn by operators, in
compliance with regulations in force in the country of use.
Electrolux Professional SPA declines any liability for any
inaccuracies contained in the manual, if due to printing or
translation errors.
Any supplements to the installation, use and maintenance manual
the Customer receives from the Manufacturer will form an integral
part of the manual and therefore must be kept together with it.
A.1.10 PERSONAL PROTECTION EQUIPMENT
Given below is a summary table of the Personal Protection
Equipment (PPE) to be used during the various stages of the
machine’s service life.
X
Safety
footwear
Protective
garments
Gloves
Glasses
Ear
protectors
Mask
Safety
helmet
Stage
Transport
Handling
Unpacking
Assembly
Normal use
Adjustments
Routine
cleaning
Extraordinary
cleaning
Maintenance
Dismantling
Scrapping
X
X
X
X
X
X (*)
X
X (*)
X
X
X
X
X
X
Key:
X
PPE REQUIRED
PPE AVAILABLE OR TO BE USED IF NECESSARY
PPE NOT REQUIRED
(*) During
Normal use
, gloves protect hands from the cold tray
when being removed from the appliance.
NOTE: The gloves to be worn during
Cleaning
are the type
suitable for contact with the cooling fins (metal plates).
Failure to use the personal protection equipment by operators,
specialised technicians or users can involve exposure to chemical
risk and possible damage to health.
A.1.11 KEEPING THE MANUAL
The manual must be carefully kept for the entire life of the
machine, until scrapping.
The manual must stay with the machine in case of transfer, sale,
hire, granting of use or leasing.
A.1.12 RECIPIENTS OF THE MANUAL
This manual is intended for:
• the carrier and handling personnel;
• installation and commissioning personnel;
• the employer of machine users and the workplace manager;
• operators for normal machine use;
• specialised technicians - after-sales service (see service
manual).
