background image

5

IMPORTANT SAFETY INSTRUCTIONS

SELF-CLEANING OVENS 

•  Clean in the self-cleaning cycle only the parts 

listed in this Use & Care Manual.

 Before self-

cleaning the oven, remove the broiler pan and any 

utensils or foods from the oven.

•  Do Not Use Oven Cleaners

—No commercial oven 

cleaner or oven liner protective coating of any kind 

should be used in or around any part of the oven.

•  Do Not Clean Door Gasket

—The door gasket is 

essential for a good seal. Care should be taken not to 

rub, damage or move the gasket.

  The health of some birds is extremely sensitive to the 

fumes given off during the self-cleaning cycle of any 

range. Move birds to another well-ventilated room.

IMPORTANT INSTRUCTIONS FOR CLEANING 

YOUR RANGE

  Clean the range regularly to keep all parts free of 

grease that could catch fire.

 Pay particular attention 

to the area around each surface element. Do not allow 

grease to accumulate.

•  Kitchen cleaners and aerosols—Always follow 

the manufacturer’s recommended directions for 

use.

 Be aware that excess residue from cleaners and 

aerosols may ignite causing damage and injury.

•  Clean ventilating hoods frequently—Grease 

should not be allowed to accumulate on the hood 

or filter.

 Follow the manufacturer’s instructions for 

cleaning hoods.

FOR CERAMIC-GLASS COOK TOP MODELS

•  Do not cook on broken cook top

—If cook top should 

break, cleaning solutions and spillovers may penetrate 

the broken cook top and create a risk of electric shock. 

Contact a qualified technician immediately.

•  Clean cook top with caution

—If a wet sponge or 

cloth is used to wipe spills on a hot cooking area, be 

careful to avoid a steam burn. Some cleaners can 

produce noxious fumes if applied to a hot surface.

IMPORTANT INSTRUCTIONS FOR USING 

YOUR COOKTOP

•  Know which knob controls each surface heating 

unit

. Place a pan of food on the unit before turning it 

on, and turn the unit off before removing the pan.

•  Use proper pan size

—This appliance is equipped 

with one or more surface units of different sizes. Select 

utensils having flat bottoms large enough to cover the 

surface unit heating element. The use of undersized 

utensils will expose a portion of the heating element 

to direct contact and may result in ignition of clothing. 

Proper relationship of utensil to element will also 

improve efficiency.

•  Utensil handles should be turned inward and not 

extend over adjacent surface elements

—To reduce 

the risk of burns, ignition of flammable materials, and 

spillage due to unintentional contact with the utensil, 

the handle of the utensil should be positioned so that 

it is turned inward, and does not extend over adjacent 

surface units.

•  Never leave surface elements unattended at high 

heat settings

—Boilovers cause smoking and greasy 

spillovers that may ignite, or a pan that has boiled dry 

may melt.

•  Do not immerse or soak removable heating 

elements—

Heating elements should never be 

immersed in water. Heating elements clean themselves 

during normal operation.

•  Glazed cooking utensils

—Only certain types of 

glass, glass/ceramic, ceramic, earthenware, or other 

glazed utensils are suitable for cook top service without 

breaking due to the sudden change in temperature. 

Check the manufacturer’s recommendations for cook 

top use.

•  When flaming foods under a ventilating hood, 

turn the fan on.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement 

Act requires the Governor of California to publish a 

list of substances known to the state to cause cancer, 

birth defects or other reproductive harm, and requires 

businesses to warn customers of potential exposure to 

such substances.

Summary of Contents for Frigidaire CGEF3030PF

































Reviews: