Electrolux FMB330RGB0, Service Manual

Page: 15 / 27

15
8. Disconnect the two wires from disconnect block
and the ground wire attached to the motor frame.
Terminals have locks, press down on lock to remove
terminal.
9. Remove hose clamps from delivery tube, lower
spray arm support, and inlet hose to remove motor
and pump assembly.
10. Remove pump and motor assembly.
11. Complete repair in reverse order.
Drain Pump
1. Disconnect power to dishwasher.
2. Remove as much water as possible from sump
before starting this repair.
3. Remove toe kick and outer door panel.
4. Turn off water supply to dishwasher then place
protection under water line that attaches to the
water valve to catch water that will be in the line as
supply line is removed from the water valve.
5. Remove unit from under counter top. See Caution
on page 10.
6. Place protection under pump to catch water as
drain hose is removed from pump.
7. Remove the two screws mounting pump to side
frame of unit .
8. Disconnect wires from the drain pump. Terminals
have locks, press down on lock to remove terminal.
9. Replace drain pump in reverse order.
Figure below shows all components of the dishwash-
er with the unit laying on it’s back
Wash motor and pump Assembly
1. Disconnect power to dishwasher.
2. Remove as much water as possible from sump
before starting this repair.
3. Remove toe kick and outer door panel.
4. Turn off water supply to dishwasher, then place
protection under water line that attaches to the
water valve to catch water that will be in the line as
supply line is removed from the water valve.
5. Remove unit from under counter top. See Caution
on page 10.
6. The front of the pump is held in placed by the hose
to the lower spray arm support, delivery tube,
and the intake hose. The rear has an adjustable
mounting bracket.
7. Remove the two screws from the rear frame holding
motor mounting bracket before laying dishwasher
on it, back. Make sure there is protection for the
floor before unit is laid down.
Water Valve
Wash Motor
Drain Pump
Pressure Switch
Water Inlet Hose
Sump
Drain Pump
Mounting
screws
Motor mount
Motor mounting bracket
mounting screws
inlet hose
disconnect block
Capacitor