Installation and connection instructions
38
Installation and connection instructions
1
Safety information for the installation
•
Only transport the dishwasher in an upright position, otherwise salt water
may run out.
•
Before using the dishwasher for the first time, check for any damage caused in
transport. Do not under any circumstances connect an appliance that is dam
aged. In the case of damage, please contact your supplier.
•
Never use the dishwasher if the mains cable, water inlet or drain hose are
damaged; or if the control panel, work top or plinth area are damaged such
that the inside of the appliance is freely accessible.
•
Always plug the mains plug into a correctly installed shockproof socket.
•
Prior to using the appliance for the first time, ensure that the rated voltage
and type of supply on the rating plate match that of the supply where the ap
pliance is to be installed. The fuse rating is also to be found on the rating plate.
•
Multiway plugs / connectors and extension cables must not be used. This
could constitute a fire hazard through overheating.
•
The dishwasher’s cable must only be replaced by the Customer Care Depart
ment or a registered electrician.
•
A water inlet hose with safety valve must only be replaced by the Customer
Care Department.
