Electrolux FAVORIT 40760, User Manual

Page: 13 / 48

13 First use
Filling with dishwasher salt
Only use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in a dishwasher,
especially table salt, will damage the water softener.
Only fill with salt just before starting one of the complete washing
programmes.
This will prevent any grains of salt or salty water, which may have been spilt,
remaining on the bottom of the machine for any period of time, which may
cause corrosion.
TTo o ffiillll::
1 1.. Open the door, remove the lower basket and unscrew the cap of the salt
container by turning it anticlockwise.
2 2.. Pour 1 litre of water inside the container
((tth hiiss iiss n neecceessssaarryy o on nllyy b beeffo orree ffiilllliin ng g w wiitth h
ssaalltt ffo orr tth hee ffiirrsstt ttiim mee)).
3 3.. Using the funnel provided, pour in the salt
until the container is full.
4 4.. Replace the cap making sure that there is
no trace of salt on the screw thread or on
the gasket.
5 5.. Replace the cap tightly turning it clockwise
until it stops with a click.
Do not worry if water overflows from the unit when filling with salt, this is
quite normal.
The salt indicator light on the control panel can remain illuminated for 2-6
hours after the salt has been replenished, assuming the dishwasher remains
switched on. If you are using salts that take longer to dissolve then this can
take longer. The function of the machine is not affected.
117987680en_aus_27042007 prov.qxp 4/27/2007 9:49 AM Pagina 13