Electrolux FAVORIT 40760, User Manual

Page: 10 / 48

10 First use
First use
Before using your dishwasher for the first time:
● Ensure that the electrical and water connections comply with the installation
instructions
● Remove all packaging from inside the appliance
● Set the water softener
● Pour 1 litre of water inside the salt container and then fill with dishwasher
salt
● Fill the rinse aid dispenser
If you want to use combi detergent tablets such as: ‘3 in 1’, ‘4 in 1’, ‘5 in 1’ etc...
set the Multi-tab function (see Multi-tab function).
Set the water softener
The dishwasher is equipped with a water softener designed to remove minerals
and salts from the water supply, which would have a detrimental or adverse
effect on the operation of the appliance.
The higher the content of these minerals and salts, the harder your water is.
Water hardness is measured in equivalent scales, German degrees (°dH), French
degrees (°TH) and mmol/l (millimol per litre - international unit for the hardness
of water).
The softener should be adjusted according to the hardness of the water in your
area. Your local Water Authority can advise you on the hardness of the water in
your area.
The water softener must be set in both ways: manually, using the water
hardness dial and electronically, using some of the programme buttons on the
control panel
117987680en_aus_27042007 prov.qxp 4/27/2007 9:49 AM Pagina 10