building-in
electrolux
35
Building-in
This dishwasher is designed to be
fitted either under a kitchen counter or
a worksurface.
Carefully follow the instructions on
the enclosed template for building
in the dishwasher and fitting the
furniture panel.
No further openings for venting of the
dishwasher are required, but only to
let the water fill and drain hose and
power supply cable pass through.
The height of the recess where the
dishwasher is to be installed can vary
between 820 and 880 mm from the
floor since the dishwasher is fitted
with adjustable feet (max. 60 mm).
Leave a space of 2 mm between the
top of the dishwasher and the
underside of the kitchen counter.
Securing the dishwasher
Secure the dishwasher by screwing it
firmly in position under the bench or
to the cupboard beside it. Use the
angular brackets supplied which are
fitted into the slots on the top of the
dishwasher (see fig.).
Tighten the machine in position
(upwards or sideways) by using the
screws supplied (3.5 x 16 mm).
Tighten the screws so that the
dishwasher cannot tip forward and
cause damage when the door is open
and loaded.
600 mm
II54
Fitting the steam protection
Fit the steam protection onto the front
part of the worktop, using the screws
provided.
The dishwasher must be secured
to the underside of the worktop or
to adjacent units by using the
brackets supplied.
Neglect to do this can cause injury
or damage.
Under no circumstances may holes
be drilled through the sides of the
dishwasher since this could
damage the hydraulic components.
117995110 26012007.qxp 1/27/2007 9:27 AM Page 35
