Technical Support - DMM
93/106
599 77 23-65 Rev. 03
Before securing the new blade insert a screwdriver beneath the tabs
and raise them a little.
Position the new blade inside the drum guides.
Push it towards the back.
Insert the flathead screwdriver at a right angle to the blade (hole 6),
so as to position it at the centre of the two tub tabs.
Tilt it towards the right so that the left tab moves upwards.
With the screwdriver still inserted in the slot, tilt it towards the left so that
the right tab moves upwards.
With the tabs raised, the blade is secured to the drum.
