background image

Incorrect option selection

If an option which is not compatible with
the set wash programme is selected, the
message 

Err

 is displayed at the bottom of

the display for a few seconds and the in-
tegrated red light of button 

8

 start flashing.

Alarm codes

In the event of operating problems, some
alarm codes can be displayed, for example

E20

 (see paragraph «What to do if...»).

Delay Time value

7.9:

 

Clock icon

 

After the programme has started, the dura-
tion is displayed and the clock icon is anima-
ted.

7.10:

 

Door locked icon

 

After you have pressed button 

8

 and the ma-

chine has started, this icon is lighted on and
only the phase running icon stays on. When
the programme has finished, three flashing
zero ( 

0.00

 ) are displayed and this icon dis-

appears.

7.11:

 

Washing programme phase icons

• Prewash 
• Wash 
• Rinses 
• Drain 
• Spin 
By selecting the wash programme, the
washing programme phase icons corre-
sponding to the various phases making up
the programme are shown in the upper part
of the display. After having pressed button

8

 only the icon of the running phase stays on.

7.12:

 

Delay icon

 

The selected delay set by pressing the rele-
vant button appears on the display for a few
seconds, then the duration of the previously
selected programme is displayed. The rele-
vant icon is lighted on. The delay time value
decreases by one unit every hour and then,
when 1 hour remains, the time decreases
every minute.

Table of Symbols

 = Cottons, 

 = Energy Saving Pro-

gramme (Economy), 

 = Prewash, 

 =

Synthetics, 

 = Delicates, 

 = Wool, 

= Handwash,   = Lingerie, 

 = Silk,   =

Jeans, 

 = Soak, 

 = Rinses,   = Drain,

 = Spin, 

 = Delicate Spin,   = Temper-

ature, 

 = Easy Iron, 

 = Extra Rinse, 

 =

Child Safety Lock, 

 = Delay Start, 

 =

Time Manager

First use

• Ensure that the electrical and water

connections comply with the installa-
tion instructions.

• Remove the polystyrene block and

any material from the drum.

• Before the first wash, run a cotton cy-

cle at the highest temperature without

any laundry in the machine, to remove
any manufacturing residue from the
drum and tub. Pour 1/2 a measure of
detergent into the main wash com-
partment and start the machine.

Personalisation

Acoustic signals

The machine is provided with an acoustic
device, which sounds in the following cases:
• at the end of the cycle
• if there is a fault.
By pressing the 

4

 and 

5

 buttons simultane-

ously for about 

6 seconds

 , the acoustic

signal is deactivated (except if there is a fault).

By pressing these 2 buttons again, the
acoustic signal is reactivated.

Child safety lock

This device permits you to leave the appli-
ance unattended and not to worry that chil-
dren might be injured by or cause damage to
the appliance. This function remains enabled

electrolux 

 7

Summary of Contents for EWS 10770 W





























Reviews: