14
4. Switch the machine ON
Turn the selector dial to the desired programme to
switch the appliance on.
To switch the appliance off turn it to «
0
».
5. Select the desired programme
Turn the selector dial to the desired position: the
lights corresponding to the different phases making
up the selected programme light on.
6. Select the Spin Speed
or the Rinse
Hold option.
Press the SPIN SPEED button repeatedly, in
order to select the desired spin speed or the
Rinse
Hold
option. The relevant light will light up.
If you select the
Rinse Hold
option, the machine
will stop at the end of the programme with the water
in the tub.
500
700
900
1000
60°
60°
60°
40°
95°
E60°
E40°
30°
40°
30°
40°
40°
40°AA
30°
30°
60°
60°
60°
40°
95°
E60°
E40°
30°
40°
30°
40°
40°
40°AA
30°
30°
Operating sequence
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 60°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
.
If you have selected the prewash
function, pour
detergent into the appropriate compartment marked
.
3. Measure out the additive
If required, pour fabric softener into the compartment
marked ,
without exceeding the «MAX» mark.
P1210
P1209
P0004
132988520 GB.qxd 19/07/2004 09.12 Pagina 14
