12
electrolux
use
If required, pour fabric softener into the
compartment marked
(the amount
used must not exceed the “MAX” mark
in the drawer). Close the drawer gently.
Select the required programme by
turning the programme selector
dial (1)
Turn the programme selector dial to
the required programme.
The light of button
8
starts to flash and
the display shows the duration of the
selected programme.
The selector dial can be turned either
clockwise or anticlockwise. Position
O
corresponds to Reset programme/
Switching OFF the machine.
For the description of each
washing programmes of the
selector dial, consult the chapter
«Washing programmes».
C
006
5
C
006
4
At the end of the programme the
selector dial must be turned to
position O, to switch the machine
off.
Attention!
If you turn the programme selector dial
to another programme when the
machine is working, the
red
light of
button
8
will flash 3 times and the
message
Err
will appear on the display
to indicate a wrong selection. The
machine will not perform the new
selected programme.
Programme Option buttons
Depending on the programme, different
functions can be combined. These
must be selected after choosing the
desired programme and before
pressing the button
8
.
When these buttons are pressed, the
corresponding pilot lights illuminates.
When they are pressed again, the pilot
lights go out.
If an incorrect option is selected, the
integrated red pilot light of the button
8
flashes 3 times and the Err message
appears on the display for some
seconds.
For the compatibility among the
washing programmes and the
options see chapter «Washing
Programmes».
Select the temperature by pressing
button
2
Press this button repeatedly to
increase or decrease the temperature,
if you want your laundry to be washed
at a temperature different from the one
proposed by the washing machine.
132963790_EN.qxd 06/05/2008 11.23 Pagina 12
