Important!
The maximum spin speed
provided for the selected washing
programme appears in the display (
2.2
).
By pressing the button
4
it is also possible to
select one of the following options:
No spin
: option eliminates all the spin
phases and increases the number of rinses
in some programmes.
Rinse Hold (Rinse Hold)
: by selecting
this option the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has finished
the display shows the icon of the selected
programme and the message «Finished»,
while on the display (
2.5
and
2.6
) the end
cycle and the current time appear. The buz-
zer sounds a short jingle (if it’s activated), the
pilot light of the button
7
is off and the door
is locked to indicate that the water must be
emptied out.
To empty out the water, please read the
paragraph «At the end of the pro-
gramme».
Night Cycle (Night Cycle)
: by selecting
this option, the machine will not drain the
water of the last rinse, so as not to wrinkle
the laundry.
As all spinning phases are suppressed, this
washing cycle is very noiseless and it can be
performed at night or in times with a more
economical power rate. In some pro-
grammes the rinses will be performed with
more water.
When the programme has finished the dis-
play shows the icon of the selected pro-
gramme, below the icon of the selected pro-
gramme and the message «Finished», while
on display (
2.5
and
2.6
) the end cycle and
the current time appear. The pilot light of the
button
7
is off and the door is locked to indi-
cate that the water must be emptied out.
To empty out the water, please read the
paragraph «At the end of the pro-
gramme».
Select the options
Depending on the selected programme only
certain options are available and shown dur-
ing the selection phase on the display (
2.3
and
2.4
).
Note:
Not all the options are compatible
among themselves. The not compatible op-
tion icons will disappear.
Important!
For the compatibility among the
washing programmes and options, refer to
«Washing programmes».
To select the desired options, first turn the
selector dial (
1
) to desired programme and
don’t press the button
7
.
Press the buttons
5
, you can activate the
options menu. Using Up
or Down
but-
ton you can move through all the available
options.
The display will show, using all the visible
area, the selected option in highlighted
mode. The corresponding icon will appear on
the right side of the display and just below it,
a short message describes the status of the
option («Off» or «On»). See the below exam-
ple:
Press the button
6
to activate and confirm
your choice, press it again to deactivate the
selected option.
Once you have completed the selection of
the options, press the buttons
3
or
4
or sim-
ply wait 10 seconds to return the display in
the default status.
The selected icons will be shown on the dis-
play.
10
electrolux
Summary of Contents for EWN 148641 W
Page 1: ...user manual Washing Machine EWN 148641 W ...
Page 30: ...30 electrolux ...
Page 31: ...electrolux 31 ...
