Electrolux EWL 105415 W, User Manual

Page: 5 / 16

Selection of desired programme
Turn the programme selector to the re-
quired programme. The “Start/Pause”
pushbutton flashes green.
If you turn the programme selector to an-
other programme while a cycle is in pro-
gress, the appliance will ignore the new se-
lected programme. “Err” flashes and the
“Start/Pause” pushbutton flashes red for a
few seconds.
Selecting the temperature
Press the “Temperature” pushbutton re-
peatedly to increase or decrease the tem-
perature (see “Programmes table”). The
symbol means a cold wash.
Selecting the spin speed
Press the “Spin” pushbutton to change
the spin speed.
The maximum spin speeds are :
for Cottons, Wool, Lingerie, Eco, Jeans :
1000 rpm, for Synthetics, Easy iron, Inten-
sive sport : 900 rpm, for Delicates, Silk,
Sport : 700 rpm.
At the end of the programme, if you have
selected “Rinse hold”
or “Night cycle
plus” , you then need to select a “Spin”
or “Drain” programme to finish the cy-
cle and empty the water.
Selecting options
You must select the different options after
selecting the programme and before press-
ing the “Start/Pause” pushbutton (see “Pro-
gramme table”). Press the desired but-
ton(s) ; the corresponding lights come on. If
pressed again, the lights go out. If one of
the options is not compatible with the se-
lected programme, “Err” flashes on the dis-
play and the “Start/Pause” pushbutton
flashes red.
“Prewash” option
The appliance runs a prewash at 30°C
max.
"Hot water connection" option
This appliance is provided with two inlet ho-
ses : one for the cold water and one for the
hot water.
By default, the Cottons and Synthetics pro-
grammes benefit to the connection to the
available hot water of your domestic instal-
lation. The "Hot water connection"
light
illuminates.
Press the "Hot water connection" pushbut-
ton
to interrupt the hot water loading :
the corresponding light s'éteint goes off.
The machine will only load then cold water,
which will be warmed up by the heating ele-
ment of the appliance.
“Rinse plus” option
The washing machine will add one or more
rinses during the cycle. This option is rec-
ommended for people with sensitive skin
and in soft water areas.
Hold down the “Prewash”
and “Delay
Start” pushbuttons for a few seconds.
The “Rinse plus” light illuminates. The
option is permanently activated, even if the
appliance is switched off. To deactivate it,
repeat the process.
“Delay start”
This option allows you to delay the start of a
wash programme by 30, 60, 90, 2 hours to
20 hours. The selected time appears on the
display for a few seconds.
You can change or cancel the delayed start
time at any time before you press the
“Start/Pause” pushbutton, by pressing the
“Delay start”
pushbutton again (0’ indi-
cates immediate start).
If you have already pressed the “Start/
Pause” pushbutton and you want to
change or cancel the delayed start, pro-
ceed as follows :
• To cancel the delayed start and start the
cycle immediately, press “Start/Pause”
and then “Delay start”
. Press “Start/
Pause” to start the cycle.
• To change the timer delay period, you
must go through the “Stop” position
and reprogramme your cycle.
The lid will be locked during the delayed
start time. If you need to open it, you must
first pause the appliance by pressing the
“Start/Pause” pushbutton. After closing the
lid again, press the “Start/Pause” pushbut-
ton.
Time Manager
The cycle can be made longer or shorter by
using the “ Time Manager ”
pushbut-
electrolux 5