ENGLISH
13
1)
Maximum capacity depended on the model of the Washing Machine (see defined on
the control panel)
2)
Energy Saver Program with 60degC option selected is recommended for a full load of
normally soiled cotton and is the Energy and Water rating label program.
Program;
Temperature
range
1200
rpm
Max.
1)
Type of load and soil level
Max.
Spin
Speed
Max. Load
(Dry
Clothes)
30°C to 60°C
Full Wash 60;
Daily wear coloured cotton clothes such as
shirts, blouses, towels and undergarments.
Ideal for normal level of soil.
3.3 Program Options Compatibility
Program
Option
Cottons
Mixed
Bedding
Energy Saver
Baby Care
Tub Clean
Spin
Rinse + Spin
Quick 15
Daily 39
Delicates
1)
Soak
Prewash Delay
End
Hygienic
Care
No
Spin
Rinse
Hold
Full Wash 60
Extra
Rinse
1)
“
Hygienic Care
” option can be combined with temperature 40 to 90 °C only.
The door stays locked with the
water in the drum. To continue
the cycle, you must press
(Start/Pause).
Temperature Touchpad
Press this touchpad repeatedly to
increase or decrease the wash
temperature if you want your laundry to
be washed at a temperature different
from the one proposed by the washing
machine. (Symbol “ ” corresponds to
cold wash)
Spin Selection Touchpad
●
●
Press this touchpad repeatedly to
increase or decrease the spin speed or
select Rinse Hold, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine.
No spin option eliminates all the spin
phases and increase the number of
rinses.
No Spin ( )
By selecting this option the water of
the last rinse is not emptied out and
the drum turns regularly to prevent the
laundry creases.
The door is still locked to indicate that
the water must be emptied out.
Rinse Hold ( )
3.4 Options
Fill water and turn the washing
drum (this takes about 20 minutes).
After press the Start/Pause
touchpad, the machine will start to
add water to the washing drum,
which will start to rotate slowly to
dissolve detergent and evenly
distribute clothes.
The machine will enter
the process of
soaking, The washing
drum will stop and
rotate once in a while
in order to distribute
clothes.
1.
Soak (this takes about 30 minutes).
2.
Once the soaking process
complete, the machine will check
the water level again and will
start the selected program and
continue by using the same soak
water.
3.
This option allows you to soak
heavily soiled clothes and stained
items at the beginning of the wash
before main washing phase.
This option will increase the duration
of the program selected for about 50
minutes. And uses more water from
normal wash. The process is as
follows.
Add detergent for “Soak” at the
“Prewash ” compartment.
Soak
If you do not wish to use the soak water
to wash cloth, please follow the steps
below:
NOTE
Press Start/Pause to pause the
washing machine. Then rotate the
program knob to “Off” to turn off the
machine.
1.
Add detergent to the main wash
compartment and select the
program of your choice. Press
Start/Pause again to start the
selected program.
2.
The machine will detect and drain
the water in the washing drum out
automatically and fill in water once
again to be used for washing.
