![Electrolux EWF1141R9SB User Manual Download Page 22](http://html.mh-extra.com/html/electrolux/ewf1141r9sb/ewf1141r9sb_user-manual_100343022.webp)
22 www.electrolux.co.th
Press AutoDose softener touchpad to
toggle on and off, the relevant symbols
will show on display if enabled.
To Activate/Deactivate AutoDose
Softener ( )
Enter the AutoDose configuration
mode before proceeding with any
program setting. The configuration
mode may cancel temporary
settings.
AutoDose configuration
mode
1.
Press the On/Off button for a few
seconds to activate the appliance.
2. Wait about 10 seconds for appliance
internal check.
3.
To enter in configuration mode, touch
and hold “Temp” and “Spin” touchpads
simultaneously for a few seconds until
appears on display.
4. Press
Detergent touchpad to
select configure detergent dosage.
Touch the “Temp” touchpad repeatedly
to increase and “Spin” touchpad to
reduce. Minimum step is 1 ml (you can
press and hold touchpad to increase
the increment to 10ml/step).
Refill the tanks with the same
detergent and fabric softener as
before. If changing either of the liquid
detergents, clean the tanks before
refilling (see section 8.5 for instructions
on how to clean the tanks).
If the tanks are filled before the
appliance is powered on for the first
time, the AutoDose indicator will not
blink.
When the activated tank reaches a low level
of detergent,
indicator blinks slowly and
continuously on the display.
It will stop blinking when the compartment is
refilled.
If tank is not refilled, once a program has
started, the indicator will stop blinking and
stay steadily lit. Once the program is fin
-
ished, it will start blinking again.
If in both tanks detergent level is low, both
indicators blink, but only the set dosage for
detergent will be displayed.
5. Press Softener touchpad to select
configure softener dosage.
Touch the “Temp” touchpad repeatedly to
increase and “Spin” touchpad to reduce.
Minimum step is 1 ml (you can press and
hold touchpad to increase the increment
to 10ml/step).
6.
To save and exit configuration mode,
press and hold “Temp” and “Spin”
touchpads combination again for 3
seconds or you can turn the knob to any
position.
Do not refill the AutoDose tanks unless
appliance indicates that one or both
tanks are empty.
AutoDose low level indication
Summary of Contents for EWF1141R9SB
Page 102: ...102 www electrolux co th NOTE บัันทึึก ...
Page 103: ......
Page 104: ...G0032358 002 A20692102 www electrolux co th ...