Electrolux ewf10932, User Manual

Page: 26 / 104

26 www.electrolux.com
If your water is very hard or
contains traces of lime deposit, the
water inlet filter may become
clogged.
It is therefore a good idea to clean
it from time to time.
8.8 Cleaning The Water Inlet Filter
To clean the water inlet filters:
1. Close the water tap.
2. Remove the water inlet hose from
the water tap.
3. Clean the filter in the inlet hose
with a stiff brush.
4. Remove the inlet hose behind
the appliance.
5. Clean the filter in the valve with
a stiff brush or a towel.
6. Install again the inlet hose.
Make sure that the couplings are
tight to prevent leakages.
7. Open the water tap.
If the machine is exposed to
temperatures below 0°C, certain
precautions should be taken.
8.9 The Dangers Of Freezing
Turn off the water tap. 1.
2. Unscrew the inlet hose.
3. Put a bowl below the recess of
the drain pump to collect the
water that flows out.
Disconnect the mains plug
from the mains socket.
45°
Remove the drain hose from the
rear support and unhook it from
sink or spigot. 4.
Put the ends of the drain and
inlet hose in a container. Let the
water flow out of the hoses.
5. When no more water flows,
install the inlet hose and the
drain hose again.
Make sure that the
temperature is more than 0
°C before you use the
appliance again.