Electrolux ewf10932, User Manual

Page: 16 / 104

16 www.electrolux.com
Measure out the amount of
detergent required, pour it into
the main wash compartment
( ) and, if you wish to carry
out the “Prewash” phase,
pour it into the compartment
marked .
Pull out the dispenser drawer
until it stops.
-
If required, pour fabric softener
into the compartment marked
(the amount used must not
exceed the “MAX” mark in the
drawer).
-
Close the drawer gently.
-
-
Measure Out The Detergent And The Fabric Softener 2.
ATTENTION !
If you turn the program selector
dial to another program when the
machine is working, the message
“ ” will appear on the
display to indicate a wrong
selection. The machine will not
perform the new selected
program.
The appliance will automatically
adjust the selected program
duration according to the type
and size of the load. -
The display will show adjusted
program duration.
-
Step 4 - Starting a program
To start a program, press the
Start/Pause ( ) touchpad, the
corresponding pilot light will stop
flashing and a default program
duration will be displayed on the
screen.
After approx. 15 minutes
from the start of a program:
After washing cycle
finish, residues of
detergent, softener and
water may remain in the
dispenser.
It is recommended to
clean the dispenser
regularly to remove any
residue.
If you use thick softeners it
is recommended to dilute
with water.