background image

42        www.electrolux.com

Dimensions (Height / Width / Depth)

Maximum dry

clothes capacity

Spin speed (Maximum / Minimum)

1400 rpm / 400 rpm

Cottons

Mixed

Delicates

Bedding

Vapour Refresh

Energy Saver

App Program

Spin

Rinse + Spin

Sports

Wool

Quick 15

Daily 39

Full Wash 60

Favourite

10 kg

4 kg

4 kg

3 kg

1.5 kg

10 kg

-

10 kg

10 kg

4 kg

2 kg

1.5 kg

5.5 kg

10 kg

-

Program

Max. Capacity

Power supply (Voltage / Frequency)
Total power absorbed
Water supply pressure (Maximum / Minimum)

Use gloves. Cut and remove four cut 

out straps as shown.

1.

You are advised to keep all transit 

devices so that they can be refitted if the 

machine ever has to be transported 

again.

All transit bolts and packing must be 

removed before using the appliance.

CAUTION!

10. TECHNICAL DATA

11. INSTALLATION

11.1 Unpacking

85 X 60 X 65.9 cm

220 - 240 V~ / 50 Hz

2000 W

0.8 MPa / 0.05 MPa

You are advised to keep all transit 

devices so that they can be refitted if the 

machine ever has to be transported 

again.

All transit bolts and packing must be 

removed before using the appliance.

CAUTION!

Use gloves. Remove the external film.

If necessary, use a cutter.

1.

Summary of Contents for EWF1041R9WB





















































Reviews: