Electrolux EWF 14597 W User Manual Download Page 11

Select the available option by pressing
buttons 3, 4 and 5

Depending on the selected programme, dif-
ferent functions can be combined before
pressing the button 

8

 . By selecting an op-

tion the relevant pilot light illuminates.
If an incorrect option is selected, the integra-
ted 

red

 pilot light of the button 

8

 flashes 3

times and the 

Err

 message appears on the

display for few seconds.

For compatibility among the washing
programmes and the options see chap-
ter «Washing Programmes».

Select the Delay Start by pressing
button 6

Before you start the programme, if you wish
to delay the start, press the button 

6

 repeat-

edly, to select the desired delay. The rele-
vant pilot light goes on.
The selected delay time value (up to 20
hours) will appear on the display a few sec-
onds, then the duration of the programme
will appear again.
You must select this option after you have
set the programme and before you press
button 

8

 .

You can cancel or modify the delay time at
any moment, before you press button 

8

 .

Selecting the delayed start:
1. Select the programme and the required

options.

2. Select the delay start by pressing the but-

ton 

6

 .

3. Press button 

8

 :

– the machine starts its hourly count-

down.

– The programme will start after the se-

lected delay has expired.

Cancelling the delayed start after having
pressed button 

8

 :

1. Set the washing machine to PAUSE by

pressing button 

8

 .

2. Press button 

6

 once until the symbol 

0’

is displayed

3. Press button 

8

 again to start the pro-

gramme.

Important!

 The selected delay can be

changed only after selecting the washing
programme again.
The Delay Start 

can not

 be selected with

DRAIN

 programme.

Start the programme by pressing
button 8

To start the selected programme, press the
button 

8

 , the green pilot light of the button

8

 stops blinking.

To interrupt a programme which is running,
press the button 

8

 : the green pilot light

starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 

8

again

 . If you have chosen a delayed start,

the machine will begin the countdown. If an
incorrect option is selected, the 

red

 pilot

light of the button 

8

 blinks for 3 times the

message 

Err

 is displayed for a few seconds.

Select the Time Manager option by
pressing buttons 10

By pressing these buttons repeatedly, the
duration of the washing cycle can be in-
creased or decreased. The soil level icon
will appear on the display to indicate the
chosen degree of soil. This option is availa-
ble only with 

Cotton

 , 

Synthetic

 and 

 Deli-

cate

 programmes.

Soil Level

Icon

Type of fabric

Intensive

For heavy soiled
items

Normal

For normal soiled
items

Daily

For daily soiled items

Light

For slightly soiled
items

Quick

For very slightly
soiled items

Super Quick 

1)

For items used or
worn for a short time

1) We recommend you to reduce the load sizes (see

Washing programmes table).

electrolux 

 11

Summary of Contents for EWF 14597 W

































Reviews: