After approximately 15 minutes from
the start of the programme:
• The appliance adjusts automatically
the programme duration agree with
the laundry load.
• The display shows the new value.
STARTING A PROGRAMME WITH
DELAY START
• Press
again and again until the dis-
play shows the delay you want to set.
The related indicator comes on the dis-
play.
• Press
:
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set of
the delay start before you press
.
To cancel the delay start:
1. Press
to set the appliance to pause.
2. Press
until the display shows
’.
Press
again to start the programme
immediately.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before
they operate.
1. Press
. The indicator flashes.
2. Change the options.
3. Press
again. The programme con-
tinues.
CANCELLING A PROGRAMME
1. Turn the programme knob to to
cancel the programme and to deacti-
vate the appliance.
2. Turn the programme knob again to ac-
tivate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the wa-
ter.
OPENING THE DOOR
While a programme or the delay start oper-
ates, the appliance door is locked and the
display shows the indicator
.
Caution!
If the temperature and level
of the water in the drum are too high,
you cannot open the door.
Open the appliance door when the
delay start operates:
1. Press
to pause the appliance.
2. Wait until the door lock indicator
goes off.
3. You can open the door.
4. Close the door and press
again.
The delay start continues to operate.
Open the appliance door when the
programme operates:
1. Turn the programme knob to to de-
activate the appliance.
2. Wait for some minutes and then open
the appliance door.
3. Close the appliance door.
4. Set the programme again.
AT THE END OF THE PROGRAMME
• The appliance stops automatically.
• The acoustic signal operates (if it is acti-
vated).
• In the display comes on.
• The indicator
goes off.
• The door lock indicator
goes off.
• Remove the laundry from the appliance.
Make sure that the drum is empty.
• Keep the door ajar, to prevent the mildew
and odours.
• Close the water tap.
• Turn the programme knob to to deac-
tivate the appliance.
The washing programme is completed,
but there is water in the drum:
– The drum turns regularly to prevent the
creases in the laundry.
– The door lock indicator
is on. The
door stays locked.
– You must drain the water to open the
door.
To drain the water:
1. If necessary, decrease the spin
speed. if you set
, the appli-
ance only drains.
2. Press
. The appliance drains the
water and spins.
3. When the programme is completed
and the door lock indicator
goes
off, you can open the door.
4. Turn the programme knob to to
deactivate the appliance.
12
electrolux
