background image

Daily use

Load the laundry

Open the door by carefully pulling the door
handle outwards. Place the laundry in the
drum, one item at a time, shaking them out
as much as possible. Close the door.

Measure out the detergent and the fab-
ric softener

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent re-
quired, pour it into the main wash compart-
ment 

 or in the appropriate compartment

if the selected programme/option it requires
(see more details in «Detergent dispenser
drawer»).

If required, pour fabric softener into the com-
partment marked 

 (the amount used must

not exceed the «MAX» mark in the drawer).
Close the drawer gently.

Select the required programme by
turning the programme selector dial (1)

Turn the programme selector dial to the re-
quired programme. The washing machine
will propose a temperature and automatically
select the maximum spin value provided for
the programme you have chosen. You can
change these values by operating the corre-
sponding buttons. The 

green

 pilot light of the

button 

8

 starts to flash.

The selector dial can be turned either clock-
wise or counterclockwise. Turn to position
« 

O

 » to reset programme/Switching the ma-

chine off.

At the end of the programme the selec-
tor dial must be turned to position O, to
switch the machine off.

Caution!

 If you turn the programme

selector dial to another programme
when the machine is working, the 

red

pilot light of button 

8

 will blink 3 times

and the message 

Err

 is displayed to

indicate a wrong selection. The machine
will not perform the new selected
programme.

Select the temperature by pressing
button 2

By selecting a programme, the appliance
proposes automatically a default tempera-
ture.

 electrolux

Summary of Contents for EWF 12491 W





























Reviews: