background image

5  

electrolux.com.au

6

GUIDE TO THE APPLIANCE

COMPONENTS

CONTROL PANEL

1

2

3

4

5

6

7

8

1

1

1

5

2

6

3

7

4

8

2

2

Control panel

For warming cups and glasses

For setting the duration

For warming plates and dishes

For adjusting temperature and time

For keeping food warm

Cancel button

For setting the temperature

Start button

Anti-slip mat 

 

(for keeping crockery secure)

Press the middle of the drawer firmly to open or close it. When opening,  

the drawer pops out slightly. You can then pull it out towards you.

The appliance can be used to keep food warm at the 
same time as warming plates and dishes, but please 
ensure food is covered properly to prevent spillage.  

OPERATION

FUNCTION SETTINGS

In waiting state, press     to start the function  
of warming cups and glasses to 40°C.

40°C will display.

Touch     or     to adjust the temperature.

Touch     and then touch     or     to adjust  

the warming time.

Touch     to set the temperature and time.

Close the door, there will be a beep, and then  
the appliance will start working.

NOTE:

• 

During parameters setting, you can press other 
function keys to change the function between  
   (Low),    (Med)  and    (Keep Warm).

• 

Before closing the door, you can touch     to  

cancel the setting and the appliance will go back  
to waiting state.

• 

During the process of working, open the door to  
enter the parameter adjusting mode, then press 

  or

     to adjust the temperature.

• 

You can press either  

  or     to select which 

parameter you need to adjust, then press     to  

set the temperature or time.

• 

After saving the setting as above, you can press   

  to enter the waiting state, or close the door  

to start working.

The appliance will beep to give user feedback when 
buttons are touched. The appliance will automatically 
switch off after 1 hour if the Duration Timer has not  
been set.

Duration Timer

The timer default duration is 1 hour. Longer durations can 
be set by touching the     sensor. One touch for 1 hour 

(1h), two touches for 2 hours (2h), etc., to a maximum of  
6 hours. 
The appliance will beep 3 times when the duration timer  
is finished. 

TEMPERATURE SETTINGS

Each function has its own temperature range. The factory-
set recommended temperatures are printed in bold. The 
temperature can be altered in 5° steps by touching the  

  sensor. The last temperature selected is automatically 

activated the next time the drawer is switched on, and  
this is shown in the display.

  

Low

  

Med

  

Keep Warm

Min.

40°C

60°C

60°C

Max.

60°C

80°C

80°C

CAPACITY

The quantity that can be loaded will depend to a great 
extent on the size and weight of your own crockery. Do not 
overload the drawer. The maximum load bearing capacity 
of the drawer is 25 kg. Under the maximum load bearing 
capacity, the drawer should be opened or closed carefully.
Here are some suggested examples of loading capacities: 
• 

6 dinner plates  Ø 26cm

• 

6 soup plates  Ø 23cm

• 

6 dessert dishes  Ø 19cm

• 

1 oval platter  Ø 32cm

• 

1 medium serving bowl  Ø 16cm

• 

1 small serving bowl  Ø 13cm

Summary of Contents for EWD1402DSD








Reviews: