Electrolux EW6F428W, User Manual

Page: 13 / 40

B Delay start indicator.
C The digital indicator can show:
• Programme duration (e. g.
).
• Delay time (e. g. ).
• Cycle end ( ).
• Warning code (e.g. ).
D Time Manager bars level indicator.
E Drum clean indicator.
F Child safety lock indicator.
G Add garments indicator. Illuminates at the beginning of
the Wash phase, while the user can still pause the appli‐
ance and add more laundry.
7. DIAL AND BUTTONS
7.1 Introduction
The options/functions are
not available with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set incompatible options/
functions.
7.2 On/Off
Press this button for a few seconds to
activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance after several
minutes to reduce the energy
consumption, you may need to activate
the appliance again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
7.3 Temperature
When you select a washing programme,
the appliance automatically proposes a
default temperature.
The indicator Cold = cold water.
The indicator of the set temperature
comes on.
7.4 Spin
When you set a programme, the
appliance automatically sets the
maximum spin speed allowed except
programme Denim.
Additional spin options:
• No Spin . The related indicator
comes on.
Set this option to deactivate all spin
phases. The appliance performs only
the draining phase of the selected
washing programme. Set this option
for very delicate fabrics. The rinse
phase uses more water for some
washing programmes
• Rinse Hold . The related indicator
comes on.
The final spin is not performed. The
water of the last rinse is not drained
out to prevent the fabrics from
ENGLISH 13