ENGLISH
10 START/PAUSE button
(Baslat/Beklet)
This button has three functions:
•
Start
: after you have selected the desired
programme and options, press this button to start
the washing machine. The light above the button
will stop flashing and remain lit.
If you have selected a delay time by means of
button 11, the countdown will begin and will be
shown on the display.
•
Pause
: when you press this button again, the
programme in progressis interrupted. The light
above the button will start flashing. To restart the
programme, press the button again.
When you PAUSE the cycle, the DOOR LOCKED
light goes out, and it becomes possible to open the
door, provided
• the washing machine is not in the heating phase;
• the level of the water is not high;
• the drum is not turning.
Important!
You must set the washing machine to PAUSE before
you make any change in the programme in progress.
•
Draining of water and spinning
after the
execution of programmes with the RINSE HOLD
(SUDA BEKETME) option.
11 SKIP/RESET button
(ILERLETME/IPTAL)
At the end of a programme, you must press this
button once or repeatedly, in order to clear the
contents of the memory (the display will show three
blinking dashes); otherwise, the next time you switch
the washing machine on, the blinking zero will
reappear and the audible warning signals relevant to
the end of the previous cycle will be given.
You can also press the SKIP/RESET button to
exclude one or several phases of the programme
which is running, as indicated below.
- set the washing machine to PAUSE by pressing the
START/PAUSE button (the relevant light will flash);
- press the SKIP/RESET button once or several
times, until the required phase(s) is(are) cancelled
(the light next to the name of the phase(s) will go
out).
Example:
In this case, both the
drain and the spin (at the
speed provided for the
selected type of fabric)
will be performed.
This button allows you also to select
special
programmes
, such as RINSES, SPIN and DRAIN.
•
If the machine is already switched on
because it
has just performed a washing programme, proceed
as follows:
- depress SKIP/RESET once or repeatidly to cancel
the previously performed programme;
- select the type of fabric by means of button
“ÇAMASIR”;
- select the special programme:
•
RINSES (DURULAMA)
Depress SKIP/RESET
once
, the pilot light
YIKAMA (WASH) goes out.
•
SPIN (SIKMA)
Depress SKIP/RESET
twice
, the pilot lights
YIKAMA (WASH) and DURULAMA (RINSES) go
out.
•
DRAIN (BOSALTMA)
Depress SKIP/RESET
three times
, the pilot lights
YIKAMA (WASH), DURULAMA (RINSES) and
SIKMA (SPIN) go out.
Example:
In this case the machine
will perform the rinses
followed by the spin.
display illuminates.
flash.
13
132991030 EW1289W.qxd 08/07/2003 13:33 Pagina 13 (Nero/Process Black pellicola)
