10
Use
1
2
3
4
5
6
7 8 9
10 11 12
Control panel
1 ON/OFF button
Press this button to switch the machine on. The
display (8) will show three blinking dashes or a
blinking zero.You will find more detailed explanations
on page 12 (see DISPLAY).
Press it again to switch the machine off.
2 Mains-on light
This light comes on when the ON/OFF button is
pressed, and goes out when it is pressed again.
3 FABRIC button
Press this button repeatedly to select the programme
on the basis of the type of laundry to be washed. The
light relevant to the selected programme will light up.
The machine will propose a temperature and
automatically select the maximum spin value
provided for the programme you have chosen. You
can change these values by operating buttons 4 and
5.
Hand wash
When you select this programme, you obtain a
particularly delicate washing, suitable for articles of
clothing whose label indicates that they must be
hand-washed
.
4 TEMPERATURE button
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be
washed at a temperature different from the one
proposed by the washing machine. The relevant light
will light up.
Maximum temperatures are 95°C for cotton, 60°C for
synthetic fabrics,40°C for delicate fabrics, wool and
fabrics to be hand-washed(HAND WASH
programme).
Position SOGUK corresponds to a COLD WASH.
This option can be used for very delicate laundry,
such as curtains.
Important!
By depressing TEMPERATURE and SPIN SPEED
buttons simultaneously, the acoustic signal at the
end of the cycle is suppressed.
5 Spin speed button (DEVIR)
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
washing machine. The relevant light will light up.
Maximum speeds are:
• for cotton: 1,200 rpm;
• for synthetic fabrics, wool, and fabrics to be hand-
washed: 900 rpm;
• for delicate fabrics: 700 rpm.
RINSE HOLD position (SUDA BEKLETME)
: when
you choose this option, the machine will not drain the
water of the last rinse, so as not to wrinkle the
laundry.
At the end of the cycle, the light of the
START/PAUSE button(BAÇLAT/BEKLET) will flash,
to indicate that the water must be drained.
To complete the cycle, choose one of the following
options:
•
Draining and spin:
- Press the START/PAUSE button
. The machine
will drain the water, then spin the laundry at the
maximum speed provided for the performed
programme.
-
Select spin speed
by means of button 5, and
press the START/PAUSE button.
132991030 EW1289W.qxd 08/07/2003 13:33 Pagina 10 (Nero/Process Black pellicola)
