10.2
Using the Child Lock
The Child Lock prevents an accidental
operation of the appliance.
1.
Activate the appliance.
2.
Touch and
at the same time
until the display shows a message.
To deactivate the Child Lock function
repeat step 2.
10.3
Function Lock
This function prevents an accidental
change of the heating function. You can
activate it only when the appliance
operates.
1.
Activate the appliance.
2.
Set a heating function or setting.
3.
Press again and again until the
display shows: Function Lock.
4.
Press
to confirm.
To deactivate the function, press . The
display shows a message. Press again
and then
to confirm.
When you deactivate the
appliance, the function also
deactivates.
10.4
Set + Go
The function lets you set a heating
function (or a programme) and use it later
with one press of a sensor field.
1.
Activate the appliance.
2.
Set a heating function.
3.
Press again and again until the
display shows: Duration.
4.
Set the time.
5.
Press again and again until the
display shows: Set + Go.
6.
Press
to confirm.
Press a sensor field (except for ) to start
the function: Set + Go. The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
• Function Lock is on when
the heating function
operates.
• The menu: Basic Settings
lets you activate and
deactivate the function:
Set + Go.
10.5
Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time
if a heating function operates and you do
not change any settings.
Temperature (°C) Switch-off time
(h)
30 - 115
12.5
120 - 195
8.5
200 - 230
5.5
The Automatic switch-off
does not work with the
functions: Light, core
temperature sensor, End
Time, Duration.
10.6
Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back
to the day brightness mode for the
next 10 seconds.
– if the appliance is deactivated and
you set the function: Minute
Minder. When the function ends,
the display goes back to the night
brightness.
www.electrolux.com
18