Electrolux EUF 29320, User Manual

Page: 11 / 16

Removing the transport support
Your appliance is equipped with transport
support to secure the door during transpor-
tation.
To remove them do these steps:
1. Open the door.
2. Remove the transport support from the
door sides.
3. Remove the transport support from the
lower hinge (some models).
Important! Some models are fitted with a
silencing pad under the cabinet. Do not
remove this pad.
3
2
Rear spacers
Install the spacers provided within the ac-
cessory bag as shown in the figure.
Install the spacers on the back side of the
panel.
Levelling
When placing the appliance ensure that it
stands level. If necessary adjust the feet us-
ing the adjustment spanner supplied.
Door reversibility
To change the opening direction of the
door, do these steps:
1. Remove the plug from the power.
2. Remove the ventilation grille. Remove
the upper filling and install it on the op-
posite side of the grille.
Remove the pedal hole cover and in-
stall the cover provided in the accesso-
ry bag on the opposite side.
3. Lay down the appliance back side
down on a wooden support.
4. Unscrew the hinge (B1) and remove the
cover plate (B2) and the support (B3).
Remove the cover (B4) on the opposite
side and install the support (B3) the
cover plate (B2) and the hinge (B1). In-
stall the cover (B4) on the opposite
side.
B1
B3 B4
B2
electrolux 11