45
Electrolux 818 21 53-03/4
Control Panel
*
-- 18
ACTION FREEZE
A
B
C D E F G
A. Freezer power switch
Switches the freezer on and off.
B. Temperature display
Shows the highest temperature inside the freezer.
C. Temperature adjustment button/thermostat
Used to set the temperature in the freezer.
D. FAST FREEZE button
Used to switch the Fast Freeze feature on and off.
E. Yellow indicator lamp
Lights when Fast Freeze is operating.
F. Alarm shut-off button
Used to turn the audible alarm off.
G. Red warning lamp
Flashes when one of the alarms in the cabinet has
been triggered.
Before use
GB
Position and clean the cabinet as explained in the
section "Installation".
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 4 hours. Otherwise the
compressor may sustain damage. This
time will allow the oil sufficient time to
return to the compressor.
Using the freezer
GB
To start the freezer and set the
correct temperature
Switching on:
Switch on the freezer by pressing the power switch.
The alarm sounds if the temperature inside the
freezer reaches room temperature. Turn off the alarm
by pressing the switch-off button.
Setting the temperature
Press the buttons until the desired temperature blinks
on the temperature display. (The temperature can be
set between -15°C and -24°C.)
"+" increases the temperature.
"-" decreases the temperature.
Once set, the temperature display shows the current
temperature inside the freezer.
Allow the cabinet to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
cabinet.
It is not necessary to reset the temperature when the
cabinet is switched on after it has been out of use.
The thermostat recalls the previously set
temperature.
ACTION FREEZE
*
--18
ACTION FREEZE
*
20
ACTION FREEZE
*
--18
